background image

2

9.

 Always switch off the product and disconnect from supply if it is 

left unattended and before assembling, disassembling, cleaning or 
approaching parts that move in use.

10.

 Do not immerse the product or allow the supply cord and plug come 

into contact with water or other liquid.

11.

 The use of accessory attachments, including canning jars, not 

recommended by the appliance manufacturer may cause a risk of fire, 
electric shock or injuries to persons.

12.

 Do not let cord hang over edge of table or counter or touch hot surfaces.

13.

 Do not place on or near a hot gas or electric burner or in a heated oven.

14.

 Extreme caution must be used when moving an appliance containing 

hot oil or other hot liquids.

15.

 Where applicable, always attach plug to appliance and check that the 

control is OFF before plugging cord into wall outlet. To disconnect, turn 
the control to OFF, then remove plug from wall outlet.

16.

 Do not use appliance for other than intended use.

17.

 Avoid contacting moving parts.

18. 

Keep hands and utensils out of container while blending to reduce the 

risk of severe injury to persons or damage to the power blender. A scraper 
may be used but must be used only when the blender is not running (does 
not apply to an acceptable scraper integral with the appliance).

19. 

Do not use the product if the blade is curve or damage.

20. 

Never operate the product without any liquid in the jar or empty.

21. 

Never try to defeat the interlock switch mechanism, make sure the 

accessory is completely installed before operation.

22. 

Do not overfill the jar.

23. 

Always operate blender with cover in place.

24. 

CAUTION: 

In order to avoid a hazard due to inadvertent resetting 

of the thermal cut-out, this appliance must not be supplied through an 
external switching device, such as a timer, or connected to a circuit that is 
regularly switched on and off by the utility. If the thermal cut-out operate 
during using, please switch off the product and unplug the plug from the 
supply main, let the product cold down before use.

Reviews: