Mienta Titan MW32217A, Instruction Manual

Page: 7 / 32

20 cm
20 cm
30 cm
min
85 cm
Hub (underside)
Glass tray
Turntable shaft
Turntable ring assembly
Instruction Manual
7
Turntable Installation
a. Never place the glass tray upside down. The glass tray should never be restricted.
b. Both glass tray and turntable ring assembly must always be used during cooking.
c. All food and containers of food are always placed on the glass tray for cooking.
d. If glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized
service center.
Countertop Installation
- Remove all packing material and accessories.
- Examine the oven for any damage such as dents or
broken door. Do not install if oven is damaged.
- Cabinet: Remove any protective film found on the
microwave oven cabinet surface.
- Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magne-
tron.
Installation
• Select a level surface that provide enough open space vents.
(1) The minimum installation height is 85cm.
(2) The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30cm above the oven, a minimum clearance of 20cm is
required between the oven and any adjacent walls.
(3) Do not remove the legs from the bottom of the oven.
(4) Blocking the intake and / or outlet openings can
damage the oven.
(5) Place the oven as far away from radios and TV
as possible. Operation of microwave oven may
cause interference to your radio or TV reception.
(6) Plug your oven into a standard household outlet.
Be sure the voltage and the frequency is the same as the
voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cook top or other heat-producing
appliance. If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
The accessible surface maybe hot during operation