Instruction Manual
3
Components
A. Lid Release Handle
B. Lid
C. Ergonomic Handle
D. “ON/OFF” Switch
E. Indicator Lamp
F. Multi Directional Power Base
With Cord Storage
Operating instructions
1. Plug the kettle in the electricity wall socket.
2. Fill the kettle with water and place it level on the base so that contact is established with
the power connection.
3. Switch on the kettle using the “ON/OFF” switch. The kettle cannot be switched “ON” if it
is not properly seated on the base.
4. Before using the kettle for the first time, fill it with water, bring it to a boil and then pour it
away. Repeat this process two or three times.
5. Do not fill the kettle with more than 0.8L.
6. The kettle is automatically switched “OFF” when the water boils. However, the kettle can
also be turned “ON” and “OFF” at any time with the “ON/OFF” switch.
7. After an adequate cooling- off period the water can once again be brought to a boil by
turning “ON” the switch.
8. The kettle can be taken off the base when the switch is in the “OFF” setting.
Cleaning and maintenance
•
Always disconnect the plug from the wall socket before cleaning the kettle and the
base. Wipe the kettle and base with a moist cloth and a drop of washing liquid.
Never use an abrasive material or steel wool as these may damage the surface finish.
•
Descale the kettle regularly, possibly once a week, depending on the hardness
of the water and the frequency of use. Scale significantly diminishes the heating
performance of the kettle.
•
To descale, fill 200ml with water and as much of vinegar. Bring to a boil and then
leave it to stand overnight. Next day pour away and fill the kettle with fresh water
and bring to a boil again. This water must also be poured away.
•
Normal commercial descales for kettles can also be used. Follow the instructions
for the respective descale material.
•
If the supply cord is damaged, it must be replaced by a
authorized service
center.
Before using your appliance, you must familiarize yourself with the different
components of your appliance. Every letter corresponds to one of the components of
your appliance.
A
B
C
D
F
E
