Miele WXI 860 WCS Operating And Installation Instructions Download

Page: 97 / 112

Settings

Keypad tone

Each touch of a sensor button is
confirmed with an audible tone.

Options

Off

      

(quiet)

      

(factory default)

      

(loud)

Welcome tone

The volume for the welcome tone can
be set to one of 7 different settings.

Options

Off

      

(quiet)

      

(factory default)

      

(loud)

Consumption

In this setting you can check the
saved energy and water consumption
values.

Options

Previous program

Shows the consumption for the last
wash program carried out.

Total consumption

Shows the sum of the energy and the
sum of the water used by the
previous programs.

Reset function

The energy consumption and water
consumption totals are reset to zero.

Summary of Contents for WXI 860 WCS

















































































































Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands

Miele WXI 860 WCS, Operating And Installation Instructions

Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands