manualshive.com logo in svg

Miele WWG 360, Operating Instructions Manual

Share
Download
Miele WWG 360 Operating Instructions Manual Download Page 88

Settings

88

Language

The display can be set to appear in
one of several different languages.

The 

 flag after the word 

Language

 acts

as a guide in case a language which is
not understood has been set.

The language selected is saved.

Buzzer volume

The buzzer sounds to let you know the
programme has finished. The buzzer
can be set to be louder or quieter.

Selection

-

Off

-

      

 (quiet)

-

      

 (loud) (factory default)

Keypad tone

Each touch of a sensor control is con-
firmed with an audible tone.

Selection

-

Off

-

      

 (quiet)

-

      

 (factory default)

-

      

 (loud)

Welcome tone

The volume for the welcome tone can
be set to one of 7 different settings.

Selection

-

Off

-

      

 (quiet)

-

      

 (factory default)

-

      

 (loud)

Summary of Contents for WWG 360





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands