Miele WWE760 Operating Instructions Manual Download Page 53

Page: 53 / 104

Changing the programme sequence

Safety lock

Locking the machine prevents a wash
programme being cancelled by mis-
take.

Activating the safety lock



Touch the

Start/Stop

sensor.

The following will appear in the display:

Cancel programme











Use the



sensor control to scroll

through the list:

Activate safety lock











Touch the

sensor.

Deactivating the safety lock



Touch the

Start/Stop

sensor.

The following will appear in the display:

Deactivate lock











Touch the

sensor.

Adding or removing laundry

Laundry can only be added or re-
moved at the beginning of a wash pro-
gramme.

If the message to Add laundry is not
visible in the display then it is no
longer possible to add items of laun-
dry.



Press the

Start/Stop

button.

The following will appear in the display:

Cancel programme











Touch the



sensors until the fol-

lowing appears in the display:

Add laundry











Touch the

sensor.

The programme will stop and the door
will unlock.



Pull open the door.



Add or remove items.



Close the door.



Touch the

Start/Stop

sensor.

The programme will continue.

Summary of Contents for WWE760









































































































Search results

Summary of Contents for WWE760

Reviews:

Related manuals for WWE760

Brands by name

Popular brands

Miele WWE760, Operating Instructions Manual

Search results

Summary of Contents for WWE760

Reviews:

Related manuals for WWE760

Brands by name

Popular brands