Miele WWD 660 Operating Instructions Manual Download Page 19

Page: 19 / 96

Before using for the first time

3. Commissioning TwinDos

The TwinDos system can only be oper-
ated with the Miele UltraPhase 1 and
UltraPhase 2 detergent cartridges. It is
not possible to use any other detergent
in the TwinDos system.

The dispensing quantities for
UltraPhase 1 and UltraPhase 2 are pre-
set for water hardness level 2 in the de-
fault settings.

You can change the dispensing quant-
ity. See the “Programmable functions”
chapter, “TwinDos” section.



Open the access panel for TwinDos.



Remove the film from the detergent
cartridges.



Push the detergent cartridge for
UltraPhase 1 into compartment 1 and
the detergent cartridge for
UltraPhase 2 into compartment 2.



Close the TwinDos access panel.

Summary of Contents for WWD 660

































































































Search results

Summary of Contents for WWD 660

Reviews:

Related manuals for WWD 660

Brands by name

Popular brands

Miele WWD 660, Operating Instructions Manual

Search results

Summary of Contents for WWD 660

Reviews:

Related manuals for WWD 660

Brands by name

Popular brands