Miele WWD 120 Operating Instructions Manual Download Page 78

Page: 78 / 84

Detergents and care products

Specialist detergents



These specialist detergents are
available as convenient single-use
capsules.

Caps Sport

- For synthetic fabrics

- Neutralises odours thanks to built-in

odour absorber

- Prevents static charge in clothes

- Retains the shape and breathability

of synthetic fabrics

Caps DownCare

- For down-filled items

- Retains the elasticity and

breathability of down

- Lanolin for effective cleaning and

gentle care

- Down does not stick together and

retains its loft

Caps WoolCare

- Woollens and delicates detergent

- Special wheat-protein-based agents

- Fibre-protection technology to help

prevent items shrinking and felting

- Colour-protection formula for gentle

cleaning

Caps CottonRepair

- Special-purpose detergent for cotton

fabrics

- Visibly renews fabric with just one

wash

- Special Miele formula with

Novozymes technology

- Removes pilling and renews colour

intensity and brightness

- Depending on fabric do not use more

than 1–2 times per year

Summary of Contents for WWD 120





















































































Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands

Miele WWD 120, Operating Instructions Manual

Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands