Miele WWB 020 Operating Instructions Manual Download Page 12

Page: 12 / 80

Operating the washing machine

How the control panel works

The











, and



sensor

buttons react to fingertip contact.
Selection is possible as long as the
respective sensor button is lit.

If a sensor button is brightly lit, this
means it is currently selected

If a sensor button is dimly lit, this
means it can be selected



and



sensor buttons for

temperature and spin speed

After a wash program has been
selected with the program selector, the
recommended temperature (in °C) and
spin speed (in rpm) light up brightly.

Selectable temperatures and spin
speeds light up dimly.



Sensor buttons for extra options

You can supplement the wash
programs with extra options.

If a wash program has been selected,
the sensor buttons for the possible
extra options light up dimly.



Indicator lights

–



lights up if there are faults affecting
the water inlet and drainage

–



lights up if excess detergent was
used

–



lights up as a reminder about hygiene
information

–



flashes for as long as it is possible to
add laundry
lights up when the door of the
washing machine is locked



CapDosing

The CapDosing sensor buttons are
used for activating cap dosing.

–



Fabric care (e.g. fabric softener,
proofing agent)

–



Additives (e.g. detergent enhancers)

–



Detergent (for the main wash only)

Summary of Contents for WWB 020

















































































Search results

Summary of Contents for WWB 020

Reviews:

Related manuals for WWB 020

Brands by name

Popular brands

Miele WWB 020, Operating Instructions Manual

Search results

Summary of Contents for WWB 020

Reviews:

Related manuals for WWB 020

Brands by name

Popular brands