Programmable functions
89
Maximum rinse level
The water level in the rinses can be
permanently set to the highest value in
the
Cottons
and
Minimum iron
pro-
grammes.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Options
= Off
(factory default)
= On
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a
Cot-
tons
programme with a temperature of
70 °C or higher is selected.
Suds cooling should be activated under
the following circumstances:
- To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or slops basin
- In buildings where the drainage pipes
do not comply with DIN 1986
Options
= Off
(factory default)
= On
Display brightness
The brightness of the dimmed sensor
controls in the control field can be set
to one of 7 different levels.
The brightness changes as soon as you
select a different setting.
Options
= Darkest level
= Brightest level
=
(Factory default)
Cottons drying levels
You can adjust the drying levels for the
Cottons programme if needed.
Options
= Damper
= Drier
=
(Factory default)
