Miele WT 945 S WPS Operating Instructions Manual Download Page 39

Page: 39 / 76

Safety lock

Electronic programme locking (the

Locked

indicator lamp is on)

prevents the door from being opened
or the programme cancelled during a
programme.

– The

Anti-crease/Finish

lamp flashes

to show that an attempt has been
made to alter a programme. This has
no effect on the programme
sequence.

– The locking function is switched off

at the end of the programme, during
"Rinse hold" and after the appliance
has been switched off.

Engaging the safety lock

Select a programme.

Press the START button until the

Locked

indicator lamp comes on.

– The safety lock has been activated.

– The machine will not accept any

changes to the programme and the
programme will proceed to the end.

To de-activate the safety lock

Press the START button until the

Locked

indicator lamp goes out.

Or, if the

Anti-crease / Finish

indicator is

flashing:

Select the programme originally
selected, and press the START
button until the

Locked

indicator

lamp goes out.

Safety lock

Summary of Contents for WT 945 S WPS













































































Search results

Summary of Contents for WT 945 S WPS

Reviews:

Related manuals for WT 945 S WPS

Brands by name

Popular brands

Miele WT 945 S WPS, Operating Instructions Manual

Search results

Summary of Contents for WT 945 S WPS

Reviews:

Related manuals for WT 945 S WPS

Brands by name

Popular brands