Spinning
The maximum final spin speed
depends on the programme chosen.
Programme
rpm
Cottons
1600
Minimum iron
1200
Delicates
600
Silks
400
Woollens
1200
Express
1600
Automatic
1200
Dark garments
1200
Shirts
600
Denim
900
Sportswear
1200
Outerwear
800
Proofing
1000
Curtains
600
Separate rinse
1200
Starch
1500
Drain/Spin
1600
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons
programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the
Rinse hold
setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start
/
Stop
button.
– To end the programme:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin
^
Select the
Without spin
setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the
Cottons
,
Minimum iron
,
Express
and
Automatic
programmes.
WASHING
22
