manualshive.com logo in svg

Miele WKR571WPS, Operating Instructions Manual, Page: 20 / 112

Share
Download
Miele WKR571WPS Operating Instructions Manual Download Page 20

Before using for the first time

20

Tip: 

If you have selected the 12 hour

clock format you can then select 

am

 or

pm

.

Starting the calibration pro-
gramme

For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.

The following message appears in the
display:

 

Open the stopcock and run the Cottons

90°C programme without laundry.

Confirm the message with the

OK

 sensor.

To do this the 

Cottons 90 °C

 

must

 be

started without laundry and without de-
tergent.

No other programmes can be started
until calibration has been carried out.

Open the stopcock.

Turn the programme selector to 

Cot-

tons

.

Cottons

10:30

90°C

1600

rpm

Duration

1:55

h

Press the 

Start/Stop

 button.

The calibration programme has started.
This will take approx. 2 hours.

At the end of the programme the follow-
ing message will be displayed:

 

Set up completed

Reach under the door grip and pull
the door open.

Tip: 

Leave the door slightly open to al-

low the drum to dry.

Switch the washing machine off with
the 

 button.

Summary of Contents for WKR571WPS

















































































































Reviews:

No comments