Miele WKR 770 WPS Operating Instructions Manual Download Page 14

Page: 14 / 112

Operating the washing machine

Control panel

Display with sensors

See the next page for more informa‐

tion.

Start/Stop button

For starting the programme selected

and cancelling a programme once it

has started.

Temperature button

For selecting the temperature.

Spin speed button

For selecting the spin speed.

Delay start button

For selecting delay start.

Option buttons

Various options can be added to the

wash programme.

Programme selector

For selecting the wash programme.

Optical interface PC

For service technicians.



button

For switching the washing machine

on and off.

To save energy the washing machine

will switch off automatically 15 mi‐

nutes after the end of the pro‐

gramme/anti-crease phase or after

being switched on if no other selec‐

tion is made.

Summary of Contents for WKR 770 WPS

















































































































Search results

Summary of Contents for WKR 770 WPS

Reviews:

Miele WKR 770 WPS, Operating Instructions Manual, Page: 14 / 112

Search results

Summary of Contents for WKR 770 WPS

Reviews: