Miele WDD320 SpeedCare 1400 Operating Instructions Manual Download Page 32

Page: 32 / 84

Programme chart

Delicates

Cold to 40 °C

Max. load 2.0 kg

Use for

Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.

Curtains, including net curtains, specified as machine-washable by
the manufacturer.

Notes

– Dust in curtains usually makes a programme with pre-wash advis-

able.

– Deselect the spin for items which crease easily.

Woollens



Cold to 40 °C

Max. load 2.0 kg

Use for

Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.

Note

Reduce the spin speed for items which crease easily.

Shirts

Cold to 60 °C

Max. load 2.0 kg

Use for

Shirts and blouses made of cotton and mixed fibre

Note

– Pre-treat soiled cuffs and collars if necessary.

– Wash silk shirts and blouses in the

Delicates

programme.

QuickPowerWash

60 °C – 40 °C

Max. load 4.0 kg

Use for

Lightly to moderately soiled garments which are also suitable for
washing in the

Cottons

programme.

Tip

A special saturation process and wash rhythm ensure that the laun-
dry is cleaned particularly quickly and thoroughly.

Express 20

Cold to 40 °C

Max. load 3.5 kg

Use for

Cotton garments that have hardly been worn or are only very lightly
soiled

Note

The

Short

option is activated automatically.

Summary of Contents for WDD320 SpeedCare 1400





















































































Search results

Summary of Contents for WDD320 SpeedCare 1400

Reviews:

Related manuals for WDD320 SpeedCare 1400

Brands by name

Popular brands

Miele WDD320 SpeedCare 1400, Operating Instructions Manual

Search results

Summary of Contents for WDD320 SpeedCare 1400

Reviews:

Related manuals for WDD320 SpeedCare 1400

Brands by name

Popular brands