Spinning
30
Final spin speed in wash pro-
grammes
When a programme is selected, the
sensor control for the optimum spin
speed for that programme will be
brightly lit up in the control field.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme
rpm
ECO 40-60
1400
Cottons
1400
Minimum iron
1200
Delicates
900
Woollens
1200
Shirts
900
Express 20
1200
Dark garments/Denim
1200
Outerwear
900
Proofing
1200
Drain/Spin
1400
Separate rinse/Starch
1200
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of less
than 700 rpm is selected for the
Cot-
tons
programme, an additional rinse is
introduced.
To omit the final spin (Rinse
hold)
Touch the
sensor (rinse hold).
The laundry is not spun after the final
rinse and remains in the final rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
After the end of a programme
The sensor for the optimum spin
speed lights up in the control panel.
You can change the spin speed. The
Start/Stop
sensor lights up, flashing.
Start the final spin:
touch the flashing
Start/Stop
sensor
once
.
The final spin is carried out.
End the programme:
touch the flashing
Start/Stop
sensor
twice
.
The water will drain away.
To omit rinse and interim spin
and the final spin
Touch the
sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
