manualshive.com logo in svg

Miele WCH 360 SpeedCare 1600, Operating Instructions Manual

Share
Download
Miele WCH 360 SpeedCare 1600 Operating Instructions Manual Download Page 24

2. Select a programme

24

Switching on the washing ma-
chine

Turn the programme selector to a
programme.

Programme selection

There are three possible ways to select
a programme:

1. Select standard programmes with
the programme selector dial

Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The standard display will
then appear.

2. Select additional programmes by
setting the programme selector to
the “Further programmes/

” posi-

tion and using the display:

Turn the programme selector to the

Further programmes/

 position.

The following appears in the display:

Touch the 



 sensors until the pro-

gramme you want appears in the dis-
play.

Confirm the programme with the 

OK

sensor.

Preset programme parameters will be
displayed, depending on the pro-
gramme selected.

Summary of Contents for WCH 360 SpeedCare 1600





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands