Miele WCE 330 Operating Instructions Manual Download

Page: 33 / 88

Programme chart

Delicates

Cold to 60°C

Max. load 3.0 kg

Items

Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.

Curtains, including net curtains, specified as machine-washable by
the manufacturer.

Note

– Dust in curtains usually means that a programme with pre-wash is

advisable. Activate the

Pre-wash

Extra.

– For items which crease easily, deselect the spin.

Woollens



Cold to 40°C

Max. load 2.0 kg

Items

Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.

Note

Reduce the spin speed for items which crease easily.

Silks



Cold to 30°C

Max. load 1.0 kg

Items

Silks and other hand-washable fabrics with no wool content, e.g.
satin, lace and silk.

Note

Place tights, bras etc. in a washing bag.

Shirts

Cold to 60°C

Max. load 1.0 kg/2.0 kg

Items

Shirts and blouses made of cotton and mixed fibre.

Note

– Pre-treat collars and cuffs if necessary.

– Wash silk shirts and blouses in the

Silks



programme.

– If the preset

Pre-ironing

option is switched off, the maximum load

capacity is increased to 2.0 kg.

QuickPowerWash

40°C – 60°C

Max. load 5.0 kg

Items

Lightly soiled garments which are also suitable for washing in the

Cottons

programme.

Note

A special saturation process and wash rhythm ensure that the
laundry is cleaned particularly quickly and thoroughly.

Summary of Contents for WCE 330

























































































Search results

Summary of Contents for WCE 330

Reviews:

Related manuals for WCE 330

Brands by name

Popular brands

Miele WCE 330, Operating Instructions Manual

Search results

Summary of Contents for WCE 330

Reviews:

Related manuals for WCE 330

Brands by name

Popular brands