Miele WCD660 WCS Operating Instructions Manual Download Page 16

Page: 16 / 96

Before using for the first time



Damage resulting from incorrect

installation and connection.
Installing and connecting the
washing machine incorrectly will
cause serious property damage.
See “Installation”.

Removing the protective foil
and stickers



Remove:

- Any protective film from the door

- Any stickers from the front and the lid

Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.

Remove the detergent
cartridges and the drain hose
elbow from the drum

Two detergent cartridges for automatic
detergent dispensing and an elbow
piece for the drain hose are stored in
the drum.



Reach under the door grip and pull
the door open.



Take the two cartridges and the
elbow piece out of the drum.



Shut the door with a gentle swing.

This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.

Summary of Contents for WCD660 WCS

































































































Search results

Summary of Contents for WCD660 WCS

Reviews:

Related manuals for WCD660 WCS

Brands by name

Popular brands

Miele WCD660 WCS, Operating Instructions Manual

Search results

Summary of Contents for WCD660 WCS

Reviews:

Related manuals for WCD660 WCS

Brands by name

Popular brands