background image

Detergent

40

Using fabric conditioner or
starch separately

Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.

Tip: 

When adding fabric conditioner,

activate the 

Water +

 extra option.

Add fabric conditioner to the 

 com-

partment or insert the appropriate
capsule.

Add liquid starch to the 

 compart-

ment and powder or viscous starch to
the 

 compartment.

Select the 

Separate rinse/Starch

 pro-

gramme.

Change the spin speed if necessary.

Use the 

 sensor control to activate

the 

 symbol if using a capsule.

Touch the 



 sensor control.

Colour run and dye removers/
dyes

Damage due to colour run/dye

removers.
Colour run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use colour run or dye re-
movers in this washing machine.

Dyes suitable for use in domestic wash-
ing machines can be used. However,
please note that the salt used in the
dyeing process can cause corrosion to
stainless steel components in the ma-
chine if you use dye frequently. Always
follow the dye manufacturer’s instruc-
tions carefully.

Summary of Contents for WCA 030 Active





















































































Reviews: