Miele W 828 Operating Instructions Manual Download Page 17

Page: 17 / 60

Adding or removing washing
after programme start

Washing can be added or removed
after the programme has already
started, when using the following pro-
grammes.

– COTTONS

– MINIMUM IRON

– WOOLLENS

– QUICK WASH

– Starch

– MIXED WASH

Press the“Door” button and hold it
until the door springs open.

Add or remove items

Shut the door.

The programme will automatically con-
tinue.

– Apart from some exceptional cases

the door can be opened during all
sections of

COTTONS

WOOL-

LENS, QUICK WASH, Starch

and

MIXED WASH - Poly/Cottons

(high

cotton percentage) programmes.

– With

MINIMUM IRON

and

MIXED WASH - Poly/Cottons

(high

polyester percentage) the door can
be opened during the main wash
with some exceptions.

General exceptions:

The door

cannot be

opened when:

– the suds temperature is above

55°C

– the additional option “Water plus”

has been selected,

– programme locking is switched on,

– the programme has reached the

“Final spin" stage.

How to wash correctly

Summary of Contents for W 828





























































Search results

Summary of Contents for W 828

Reviews:

Related manuals for W 828

Brands by name

Popular brands

Miele W 828, Operating Instructions Manual

Search results

Summary of Contents for W 828

Reviews:

Related manuals for W 828

Brands by name

Popular brands