G
Add detergent
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
Detergent
7
100%
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%
= Add slightly less than half
the amount recommended
50%
= Add half the amount
recommended
60%
= Add slightly more than half
the amount recommended
75%
= Add three quarters of
the amount recommended
100%
= Add the full amount of
detergent recommended
You also need to take the level of
soiling and water hardness into
account.
It is important to dispense the correct
amount, because
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater
elements.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
How to wash correctly
20
Summary of Contents for W 5922
Page 75: ...75 ...
Page 76: ...M Nr 09 011 590 01 Alteration rights reserved 2211 W 5922 ...