manualshive.com logo in svg

Miele W 3923 WPS, Operating Instructions Manual

Share
Download
Miele W 3923 WPS Operating Instructions Manual Download Page 33

Cancelling a programme

You can cancel a programme at any
time after it has started.

^

Press the

Start/Stop

button.

Stopped:

Cancel programme

Continue

OK

^

Press the right hand

Menu

button

under

OK

.

The suds will be pumped away.

If you want to remove the laundry:

^

Press the

Door

button.

If you want to select a different
programme:

^

Switch the machine off with the

I-On/

0-Off

button.

^

Switch the washing machine back on
again.

^

Select and start a new programme.

Interrupting a programme

^

Switch the machine off with the

I-On/

0-Off

button.

To continue with the same programme:

^

Switch the machine back on with the

I-On/0-Off

button.

Changing a programme

Programme

After the start of a programme it is no
longer possible to select a different
programme.

Temperature

It is possible to select a different
temperature up to 5 minutes after the
programme has started.

Spin speed

It is possible to change the spin speed
up until the final spin begins.

Extra options

It is possible to select or deselect the

Short

and

Water plus

extra options up

to 5 minutes after the programme has
started.

Please note that no changes are
possible if the safety lock has been
activated.

Changing the programme sequence

33

Summary of Contents for W 3923 WPS









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands