Miele W 3514 WPS Operating Instructions Manual Download

Page: 61 / 64

Keypad tones

An audible tone sounds each time a
button is pressed.

The washing machine is delivered with
the keypad tone switched off.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The drum door is properly closed.

Press the

Start/Stop

button and keep

it pressed in whilst carrying out steps

Press the

I-On/0-Off

button in.

Wait until the indicator light for the

Start/Stop

button comes on . . .

. . . and then release the

Start/Stop

button.

Press the

Buzzer

button five times.

– The

Buzzer

indicator light will flash

six times.

will flash in the display alternating

with the number

= keypad tone is

deactivated

= keypad tone is

activated

Pressing the

Start/Stop

button will

change the display message from

(activated) or from

(deactivated).

Switch the machine off with the

I-On/0-Off

button.

The setting you have selected is now
stored in memory and will remain so
until you alter it.

Programmable functions

Summary of Contents for W 3514 WPS

































































Search results

Summary of Contents for W 3514 WPS

Reviews:

Related manuals for W 3514 WPS

Brands by name

Popular brands

Miele W 3514 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3514 WPS

Reviews:

Related manuals for W 3514 WPS

Brands by name

Popular brands