Miele W 308 Operating Instructions Manual Download Page 63

Page: 63 / 68

Top-up rinse for Cottons

When this is activated, additional wa-
ter flows into the drum at the end of
the main wash and the suds are
cooled down. Hot suds can damage
plastic drainage pipes.

Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.

Top-up rinse should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the
edge of a sink or basin.

– where the drainage pipes do not

comply with DIN 1986.

The washing machine is delivered with
the Top-up rinse for

Cottons

deactivated.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at

Finish

Press the

Start

button and keep it

pressed in whilst carrying out steps

Switch the machine on with the

I-On/0-Off

button.

Wait until the

Start

indicator light

comes on . . .

. . . and then release the

Start

button.

Turn the programme selector to the

Cottons 40°C

position:

If the

Soak/Pre-wash

sequence

indicator light:

does not flash

= the Top-up rinse for

Cottons

has not

been activated

flashes

= the Top-up rinse for

Cottons

has been

activated

Press the

Start

button to activate or

deactivate the Top-up rinse for

Cottons

option.

Switch the machine off with the

I-On/0-Off

button.

The setting you have selected is now
stored in memory and will remain so
until you alter it.

Programmable functions

Summary of Contents for W 308





































































Search results

Summary of Contents for W 308

Reviews:

Related manuals for W 308

Brands by name

Popular brands

Miele W 308, Operating Instructions Manual

Search results

Summary of Contents for W 308

Reviews:

Related manuals for W 308

Brands by name

Popular brands