background image

To avoid the risk of accidents and
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.

Correct usage

Only use the washing machine to
wash items which are specified by

the manufacturer to be machine-wash-
able on the wash-care label, and tex-
tiles composed of hand-washable wool
or wool blend fabrics as well as satin,
lace, silk and other hand-washable
garments.
Any other applications may be danger-
ous. The manufacturer is not liable for
damage resulting from improper use or
operation.

This machine is not a toy! To avoid
the risk of injury do not allow
children to play on or near it or to
play with the controls. Supervise its
use by the elderly or infirm.

Technical safety

Before setting up the machine,
check it for any externally visible

damage. Do not install and use a
damaged machine.

Before connecting the machine,
ensure that the connection data on

the data plate (voltage and connected

load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.

The electrical safety of this
machine can only be guaranteed

when continuity is complete between
the machine and an effective earthing
system which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and regularly tested and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).

Do not connect the machine to the
mains electricity supply by an

extension lead. Extension leads do not
guarantee the required safety of the
machine (e.g. danger of overheating).

The machine is built in accordance
with current safety requirements.

Unauthorised repairs could result in
unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele approved
technician.
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.

The machine is only completely
isolated from the electricity supply

when:

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the mains fuse is withdrawn.

Warning and safety instructions

6

Summary of Contents for W 2203

































































Reviews: