Miele W 1913 Operating Instructions Manual Download Page 61

Page: 61 / 68

Temperature unit

You can choose for the temperature
to be displayed in

°C/Celsius

°F/Fahrenheit

The machine is delivered with °C/
Celsius as the default setting.

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.

There are two volumes:

Off

(the machine is delivered with this
option selected as standard)

The buzzer is switched off.

Normal

The buzzer sounds at

normal

volume at

the end of a programme or when Rinse
hold is reached.

Loud

The buzzer sounds at

loud

volume at

the end of a programme or when Rinse
hold is reached.

Keypad tone

An audible tone sounds each time a
button is pressed.

The machine is delivered with the
keypad tone deactivated.

Brightness

There are ten different display
brightness settings.

The bar chart shows you the setting.

The machine is delivered with the
display brightness on setting 5.

This will change as soon as a different
setting is chosen.

Contrast

There are ten different display
contrast settings.

The bar chart shows you the setting.

The machine is delivered with the
display contrast on setting 5.

This will change as soon as a different
setting is chosen.

Programmable functions

Summary of Contents for W 1913





































































Search results

Summary of Contents for W 1913

Reviews:

Related manuals for W 1913

Brands by name

Popular brands

Miele W 1913, Operating Instructions Manual

Search results

Summary of Contents for W 1913

Reviews:

Related manuals for W 1913

Brands by name

Popular brands