This washer uses hot and cold
household water.
The washer must always be
connected to a tap water line (cold
water, inlet hose with blue tag).
Tap water line (cold water)
The tap water connection is established
using the inlet hose with the blue
marking.
If the washer is connected to this line
only, the appliance will need to be
re-programmed to cold water fill only.
Please contact your Miele dealer or
Miele Customer Service for
reprogramming instructions.
The second unused inlet hose, with the
red tag, will be attached to the rear of
the washer after re-programming.
Hot water connection
The hot water connection is established
using the inlet hose with the red
marking.
Tips for the hot water connection
– The hot water temperature at the
stopcock must not exceed 60°C, and
the ideal temperature is 55°C.
– If the hot water inlet is closed, the
washer will automatically switch over
to tap water mode after a period of
time. This safety feature is not
intended for long-term use. The
washer will continue to wash in hot
water mode, which can lead to a
poor wash result.
Installation and connection
50
