Miele W 1740 Operating Instructions Manual Download Page 20

Page: 20 / 64

Cottons

9ö8E76

30°C to 95°C

Max. load 6.0 kg

Fabric

Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.

Extra options

Short, Water plus, Pre-wash

Note for test institutes:

Short programme: 3.0 kg load and

Short

extra option

Minimum iron

43218E76

30°C to 60°C

Max. load 3.0 kg

Fabric

Synthetics, mixed fibres and easy care cottons. If fabrics have a
high proportion of man-made fibres it is advisable to programme
the machine for "Gentle action". See "Programmable functions".

Note

Reduce the spin speed for fabrics which crease easily.

Extra options

Short, Water plus, Pre-wash

Delicates

4321ac

cold to 60°C

Max. load 2.0 kg

Fabric

For delicate garments made of synthetic fibres, mixed fibres,
rayon and easy care cottons.

Curtains, including net curtains, specified as machine-washable
by the manufacturer.

Notes

– Dust in curtains usually makes using a programme with

pre-wash advisable.

– For curtains which crease easily, reduce the spin speed or

deselect the spin.

Extra options

Short, Pre-wash

Woollens

/ac

cold to 40°C

Max. load 2.0 kg

Fabric

Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.

Programme chart

Summary of Contents for W 1740

































































Search results

Summary of Contents for W 1740

Reviews:

Related manuals for W 1740

Brands by name

Popular brands

Miele W 1740, Operating Instructions Manual

Search results

Summary of Contents for W 1740

Reviews:

Related manuals for W 1740

Brands by name

Popular brands