Miele W 1614 Page 10 Operating Manual Download

Page: 10 / 64

Control panel

Display

See the following page for more
information.

Temperature button

For selecting a temperature.

Spin speed button

For selecting the final spin speed or

(Rinse hold) or deselecting the

spin

PC / Optical interface

This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.

Start/Stop button

For starting the programme selected
and cancelling a programme once it
has started.

Extra option buttons

Various Extra options can be added
to the washing programmes.

Programme selector

For selecting a programme. The
indicator light next to the selected
programme will come on. The
programme selector can be turned
clockwise or anti-clockwise.

Door button

Opens the machine door.

I-On/0-Off button

For switching the machine on or off.

Operating the washing machine

Summary of Contents for W 1614

































































Search results

Summary of Contents for W 1614

Reviews:

Related manuals for W 1614

Brands by name

Popular brands

Miele W 1614, Operating Manual

Search results

Summary of Contents for W 1614

Reviews:

Related manuals for W 1614

Brands by name

Popular brands