Fault messages in the display
Problem
Possible cause
Remedy
A
;
lights up in the
display and
Drain fault
flashes.
–
The water outlet is
blocked or
restricted.
–
The drain hose has
been fixed too high.
–
Clean the drain filter and
the drain pump.
–
The maximum delivery
head is 1 m.
;
lights up in the
display and
Water inlet
fault
flashes.
–
The water inlet is
blocked or
restricted.
Check whether
–
the stopcock is opened
properly.
–
the inlet hose is kinked.
–
the water pressure is too
low.
;
lights up in the
display and
Waterproof
fault
flashes.
The water protection
system has reacted.
Call the Service Department.
;
lights up in the
display and
Technical
fault
flashes.
There is a fault.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Anti-crease
Chk detergent
flashes in the display.
Excessive foam has
built up during
washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given
on the packaging.
A
To switch off the fault message: Switch the machine off with
I-On/0-Off
button.
Problem solving guide
34