Frequently Asked Questions
59
Message
Possible cause and solution
Clean the lint and
plinth filters. See the
Operating
Instructions for more
information.
lights
up at the end of a
program.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by lint or detergent residue.
Please see “Cleaning and care” for notes on
cleaning.
Clean the lint filters.
Also check the plinth filter and clean it if
necessary.
To switch off the message: press
OK
.
You can influence when the
Clean the lint and plinth
filters. See the Operating Instructions for more information.
message lights up.
To do this, follow the instructions in “Settings –
Airway indicator”.
Clean the lint filter.
Check the airways.
lights up after a
program has
been cancelled.
The system has been clogged by lint or detergent
residue.
To switch off the message: press
OK
.
Clean the lint filters and the plinth filter.
Please see “Cleaning and care” for notes on
cleaning.
Check that the lint filters and the plinth filter are
not damaged or worn.
If all lint filters are damaged, deformed, or cannot be
cleaned anymore, they must be replaced. For
information on when to replace a plinth filter that is
not functioning properly, refer to “Frequently Asked
Questions – Replacing the plinth filter”.
