MAKING DRINKS
GUIDE T
O THE APPLIANCE / PREP
ARA
TION
CONTROLS AND DISPLA
Y
Important information
Controls and display
Making drinks
Cleaning and care
M.-Nr. 09 857 271 / 00
CVA 6800, CVA 6805 en – AU, NZ 1914
Please refer to the Operating and installation instructions for more detailed informa-
tion on cleaning and care. Clean the coffee machine every day to avoid a build-up of
bacteria.
Recommended time inter-
val
What do I need to clean?
Every day
(at the end of the
day)
– Milk flask with lid
– Water container
– Waste container
– Drip tray and drip tray cover
Once a week (or more often if
necessary)
– Central spout
– Central spout connector
– Clean the milk valve with the cleaning brush
– Interior
– Small drip tray inside the machine door
– Brew unit
– Appliance front (especially important straight af-
ter descaling)
Once a month
– Lubricate the cap on the central spout connec-
tor
When prompted
– Milk pipework (with the Original Miele cleaning
agent for milk pipework)
– Brew unit (with cleaning tablets)
– Descale the machine when prompted to do so
As required
– Coffee bean container
– Clean the milk pipework of any blockages
The following parts must not be cleaned in a dishwasher:
– Central spout cover
– Brew unit
– Coffee bean container and lid
– Service flap
All other removable parts can be cleaned in a dishwasher.
Making espresso or coffee
ĺ
Place a cup under the central spout.
ĺ
Touch the field for the required drink:
Espresso
Coffee
Long coffee
The coffee or espresso will be dispensed
from the central spout into the cup.
Preparing a double portion
To fill two cups at the same time:
ĺ
Place one cup under each of the coffee
spouts.
ĺ
Touch the double symbol for the re-
quired drink.
Two portions of the desired drink will be
dispensed from the central spout.
Cancelling preparation
To cancel preparation:
ĺ
Touch "
Cancel
" or "
Stop
".
Drinks with milk
Notes on the milk flask
Milk is not cooled in the milk flask.
Therefore, place the milk flask in the re-
frigerator if you are not going to use milk
for a while.
Cold milk (below 13 °C) gives the best
results for milk froth.
Lid
Milk sensor
Milk suction tube
Glass milk flask
ĺ
Fill the milk flask up to max. 2 cm below
the rim. Seal the milk flask with the lid.
ĺ
Push the milk flask into the coffee ma-
chine.
Preparing drinks with milk
ĺ
Place a suitable vessel underneath the
central spout.
ĺ
Touch the drink you want to select it:
Cappuccino
Latte macchiato
Caffè latte
Hot milk
Milk froth
The coffee machine will now prepare the
desired drink.
Preparing hot water
Please note that the water prepared by
the machine is not boiling and is there-
fore not suitable for preparing tea.
ĺ
Place a suitable vessel underneath the
hot water spout.
ĺ
Select "
Hot water
"
.
Hot water will be dispensed into the vessel
under the hot water spout.
To cancel preparation:
ĺ
Touch "
Cancel
" or "
Stop
".
Using for the first time
Ĝ
Ĝ
The coffee machine must be built in
and connected to the mains electricity
supply before operating.Please refer to
the separate Operating and installation
instructions booklet.
ĺ
Clean the appliance and the milk flask
thoroughly before filling with water and
coffee beans.
ĺ
See "Setting up and using the coffee
machine" in the Operating and installa-
tion instructions.
Water hardness
Programme the coffee machine to the wa-
ter hardness level of your area so that it
functions correctly and does not get dam-
aged.
Please refer to the Operating and instal-
lation instructions for more detailed infor-
mation.
Filling the water container
Change the water every day to
prevent a build-up of bacteria.
ĺ
Fill the water container with fresh,
cold tap water up to the "max."
marker.
Filling the coffee bean
container
Important! Only fill the bean con-
tainer with roasted espresso or
coffee beans.
ĺ
Open the appliance door and re-
move the water container.
ĺ
Fill the container with roasted
coffee beans.
Exterior view
On/Off sensor
Touch display
"Back"
sensor
Door handle
Steam and hot water spout
Drip tray cover
Automatic height-adjustable central
spout with lighting
Milk flask with lid
Interior view
Ground coffee chute cover
Brew unit
Ground coffee chute
Slide control for the grinder setting
Coffee bean container
Water container
Drip tray with grid
Waste container
Drip tray inside machine door
Central spout connector
Service flap
Guide to the appliance
Preparation
Sensors
On/Off sensor
For switching appliance on and off
"Back"
For returning to the previous menu, cancelling unwanted actions
Touch display
Selecting or calling up
a menu
ĺ
Touch the field you want to select it.
Scrolling through
menus
ĺ
Swipe the screen, i.e. place your finger on the Touch display and swipe it in the direc-
tion you want.
ĺ
Or: Using your finger, touch the arrows
und
to scroll left or right.
Exiting a menu
ĺ
Touch
.
All selected entries which have not been confirmed with "
OK
" will not be saved.
Entering numbers
You can enter numbers by scrolling through and touching the roller, or by using the nu-
merical keypad.
Number roller:
ĺ
Swipe the roller up or down to select the number you want.
Numerical keypad:
ĺ
Touch
in the bottom right of the input field.
The numerical keypad appears.
ĺ
Touch the required numbers.
Once you have entered an accepted value, "
OK
" will light up green.
ĺ
Use the arrow to delete the last entered number.
ĺ
Touch "
OK
".
Entering letters
You can enter names for your own User programmes or drinks using a keyboard. Try to
use short, concise names.
ĺ
Touch the required letters or characters.
ĺ
Touch "
Save
".