Problem solving guide
63
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
The display indicates the following messages or faults
Message
Cause and remedy
Fill the condensate
container with water
This is to remind you that water is taken from the con-
densed water container when the
Steam care
pro-
gramme is being used. The condensed water con-
tainer must be filled with water to at least the
–min–
marker.
Fill the condensed water container as described
under “Condensed water container”.
To switch off the message:
Confirm with
OK
.
Please open and
close the door
This is to remind you to load the laundry when the
Steam care
programme is selected.
Load the laundry in the drum.
Clean the fluff and
plinth filters. See the
operating instruction
manual for more in-
formation.
lights up
at the end of a
programme.
There is a build-up of fluff.
Clean the fluff filters.
Clean the plinth filter.
See “Cleaning and care”.
To switch off the message:
Confirm with
OK
.
You can influence when the indicator lights up: see
“Settings – Airways indicator”.
000
lights up after
switching on.
Access via a code has been activated.
Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to ap-
pear in the display the next time the machine is
switched on.
