manualshive.com logo in svg

Miele tmr640wp, Operating Instructions Manual

Share
Download
Miele tmr640wp Operating Instructions Manual Download Page 39

Programme chart

39

Minimum iron

Max. load 4.0 kg*

Normal plus, Normal, Slightly dry, Hand iron

 

, Hand iron

 



Use for

Minimum iron items made of cotton, synthetic or mixed fibre, e.g.:

workwear, tunics, tops, dresses, trousers, table linen and socks.

Woollens handcare

Max. load 2.0 kg*

Use for

Woollen garments and fabric containing wool blends, e.g. pullovers,

jackets and socks.

Note

– Wool and wool blend items are only fluffed up; they are not dried

completely.

– Remove garments as soon as the programme has finished.

Denim

Max. load 3.0 kg*

Normal plus, Normal, Slightly dry, Hand iron

 

, Hand iron

 



Use for

Denim garments, e.g. jeans, jackets, skirts, shirts

Shirts

Max. load 2.0 kg*

Normal plus, Normal, Slightly dry, Hand iron

 

, Hand iron

 



Use for

Shirts and blouses.

* Weight of dry laundry

Summary of Contents for tmr640wp





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands