background image

Caring for the environment

2

Disposal of the packing mate‐

rial

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.
Recycling the packaging reduces the

use of raw materials in the manufactur‐

ing process and also reduces the

amount of waste in landfill sites.

Disposal of your old appliance

Electrical and electronic appliances of‐

ten contain valuable materials. They al‐

so contain materials which, if handled

or disposed of incorrectly, could be po‐

tentially hazardous to human health and

to the environment. They are, however,

essential for the correct functioning of

your appliance. Please do not therefore

dispose of it with your household

waste.

Please dispose of it at your local com‐

munity waste collection / recycling cen‐

tre.
Ensure that it presents no danger to

children while being stored for disposal.

Energy saving tips

To avoid unnecessarily long drying

times and high consumption of energy:

– Make sure that your laundry is thor‐

oughly spun before drying. The high‐

er the spin, the greater the savings

that can be made in energy and time

during drying.

– Load according to the optimum

amount of laundry recommended for

the programme being used. Under‐

loading is uneconomical. Overload‐

ing gives a poorer quality of drying

and may cause unnecessary creas‐

ing.

– Make sure the room temperature is

not too high. If there are other heat

producing appliances in the room in

which the dryer is located, make sure

the room is well ventilated and switch

the other appliances off, if possible.

– Clean the fluff filters in the door

opening after every drying cycle.

Summary of Contents for TKR 350 WP





















































































Reviews: