Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
– a wall or window duct
(available from Miele)
– an exhaust hose made of approved
non-flammable material
^
Install the required connector*,
1
,
with the exhaust hose or pipe,
2
, to
the dryer.
* The white connector with clips is
used for connection to a hose; the
gray connector without clips is used
for connection to a pipe.
The exhaust duct must not be
connected or secured with screws
or other fastening devices which
extend into the interior of the duct.
Window connection (example)
1
Window duct
2
Connector for the rigid or flexible
exhaust hose
Wall connection (example)
1
Wall pipe (Installation sheet supplied
with the Miele wall pipe)
2
Connector
3
Rigid pipe
Installation
37
Summary of Contents for T 9802
Page 28: ...24 ...
