Miele T 9446 C Operating Instructions Manual Download Page 22

Denim

Max. load: 3 kg*

Normal, Hand iron

r

Fabric type

Denim garments, e.g. jeans, jackets, skirts, shirts.

Extra
options

Low temperature. (Low temperature cannot be deselected),
Anti-crease

Cool air

Max. load: 6 kg*

Fabric type

Any item which only needs airing.

Extra option Anti-crease

Warm air

Max. load: 6 kg*

Fabric type

"Voluminous" and multi-layered fabrics whose layers have
different drying characteristics,  e.g. jackets.

For drying individual items, e.g. bath towels, bathing costumes,
tea-towels and small loads.

Note

Do not select the longest drying time to start with. Check the
items as you are drying them to find the optimum time.

Tip

You can use the

Warm air

programme to help remove odours from

cotton clothing which has been worn but it still clean (select a
duration of between 1/2 and 1 hour). Items must be suitable for
drying in a tumble dryer. Dampen the garments a little beforehand
or add a fabric conditioner sheet. The Warm air programme will not
be as effective at removing odours from any parts of the garments
which are made of synthetic fibres.

Extra
options

Low temperature (select this option for delicate fabrics with the

r

symbol on the care label), Anti-crease.

Standard pillows - Normal (drying level)

1-2 pillows up to

40 x 40 cm

Large pillows - Normal (drying level)

1 pillow up to 80

x 80 cm

Item

Pillows suitable for drying in a tumble dryer, with feather, down or
synthetic fillings.

Note

Please observe the instructions on the care label. Pillows can still
feel damp after being dried. You can use this programme several
times until the pillow feels dry.

Extra option Anti-crease

*

Weight of dry laundry

Programme chart

22

Summary of Contents for T 9446 C

























































Reviews: