Miele T 7950 WP Operating Instructions Manual Download Page 18

Page: 18 / 64

Select a programme

Select the programme you want.

The indicator for the programme
selected will light up.
A drying level or extra option indicator
may also light up and the duration may
also be displayed.

Drying level programmes

–

Cottons, Minimum iron, Outerwear,
Express, Automatic plus, Shirts,
Denim, Hygiene

Press the drying level button
repeatedly until the indicator for the
drying level you want lights up.

Any of the four drying levels can be
selected for the

Cottons

and

Express

programmes. The choice of drying level
is limited for the other programmes and

the drying level for the

Hygiene

programme

cannot be changed.

Note

You can extend the range of the drying
levels for some programmes (see
"Programmable functions").

Gentle smoothing, Woollens,
Proofing programmes

– These programmes cannot be

changed.

Selecting the duration of the timed
drying Warm air programme

The indicator light for the

Delay start

button will flash when the

Warm air

programme is selected.

Press the

Delay start

button

repeatedly until the required duration
shows in the display.

You can select a duration of

minutes

up to

2:00

hours in 10 minute steps.

Select any Extra options / Delay
start

Gentle tumble, Buzzer and Delay
start

are selected by pressing the

appropriate button (see "Extra
options/Delay start").

Anti-crease

(see next page) is

permanently switched on.

N.B.

: It is not possible to select Delay

start when using the

Warm air

programme.

How to dry correctly

Summary of Contents for T 7950 WP

































































Search results

Summary of Contents for T 7950 WP

Reviews:

Brands by name

Popular brands

Miele T 7950 WP, Operating Instructions Manual

Search results

Summary of Contents for T 7950 WP

Reviews:

Brands by name

Popular brands