Fitting a plinth facing
The gap between the lower edge of the
tumble dryer plinth and the floor can be
closed up using a suitable kitchen
furniture plinth facing.
The tumble dryer plinth has a special
groove in which a plinth facing can be
fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
Height (
H
): The plinth facing height
must be calculated after aligning the
height of the appliance with the screw
feet or after fitting the raising kit(s).
Installation
^
Calculate height (
H
) from the floor up
into the groove (on the underside of
the tumble dryer).
^
Cut the plinth facing to size.
^
Slide it into the groove.
Useful tip:
If the dryer is fitted on a raising kit, you
can use double-sided adhesive tape on
the back of the plinth facing to secure it
to the raising kit.
Installation
43
Summary of Contents for T 4809 Ci
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...M Nr 06 984 111 03 Alteration rights reserved 3809 ...
