Miele T 4123 Operating Instructions Manual Download

Page: 42 / 44

Buzzer

An audible tone sounds repeatedly at
the end of a programme.

The buzzer is activated as standard
ex-works. It can be deactivated if
wished.

The buzzer will sound if there is a fault,
even if it has been deactivated.

Follow steps

to programme and

store in memory.

The programmable functions are
activated with the help of the

Start

button and the programme selector.

Before you begin, first ensure that:

– The tumble dryer is switched off.

– The door is closed.

– The programme selector is at

Finish

Press the

Start

button and keep it

pressed in whilst carrying out steps

Switch the dryer on with the

I-On / 0-Off

button.

Wait until the

Start

indicator lamp

comes on . . .

. . . and then release the

Start

button.

Turn the programme selector to the
COTTONS

Hand iron

position.

– If the

Drying

lamp is flashing, the

buzzer

is activated

– If the

Drying

lamp is not on, the

buzzer

is deactivated

Pressing the Start button switches
between activating and deactivating
the buzzer.

Switch the machine off with the

I-On / 0-Off

button.

The setting you have selected is now
stored in memory. You can change it
again at any time.

To check:

Carry out steps

If the indicator lamp for

Drying

flashes

The Buzzer

is activated

is not on

= The Buzzer

is deactivated

Switch off the dryer.

The check is complete.

Programmable functions

Summary of Contents for T 4123













































Search results

Summary of Contents for T 4123

Reviews:

Related manuals for T 4123

Brands by name

Popular brands

Miele T 4123, Operating Instructions Manual

Search results

Summary of Contents for T 4123

Reviews:

Related manuals for T 4123

Brands by name

Popular brands