Cleaning the lint filter
The lint filter must be cleaned before
or after every program.
^
Open the door and remove the lint fil-
ter.
^
Wipe the lint off the filter with your
hand (do not use any sharp objects!)
^
Any lint remaining in the hollow part
of the door can be removed through
the gap at the bottom with a dust
brush or vacuum.
^
Return the lint filter and close the
door.
The lint filter can be rinsed with hot
water if necessary.
^
Dry the lint filter before putting it back
in place.
Before cleaning the tumble dryer,
disconnect the machine from the
power supply.
Never use abrasive cleaners, scour-
ing pads or steel wool or caustic
(oven) cleaners on the dryer. They
will damage the surface.
Cleaning the exterior and the
control panel
^
The exterior and the control panel
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^
Wipe dry using a soft cloth.
Cleaning the drum and stain-
less steel parts
^
Stainless steel surfaces can be
cleaned using a non-abrasive stain-
less steel cleaner.
^
Wipe dry using a soft cloth.
Dryer care
16
