background image

Program

When to use

Note

Normal

Available drying options: Turbo, Full load, Gentle, Anti-crease

Extra Dry

For laundry to be folded and shelved
immediately, e.g. jeans, towels.

The "Extra Dry" program should not be
selected for jersey materials.
Items may shrink.

More Dry

For uniform loads, e.g. sheets,
underwear, socks.

-

Normal

For knitted items that may shrink, e.g.
jersey material or lightweight cottons.

If items are still damp, dry again using
"More Dry".

Less Dry

For items to be left damp for ironing.

-

Hand Iron

If fabrics are too damp, dry again using
"Less Dry".

Rotary Iron

For items to be ironed with a rotary
iron.

To prevent moisture loss, roll up the
laundry until ready to iron.

Wrinkle-free

Available drying options: Turbo, Gentle, Anti-crease

More Dry

For items that do not require ironing,
e.g. pants and shirts.

-

Normal

For items to be hung after drying.

Less Dry

For items which require ironing.

Reduce load size for fabrics that wrinkle
easily.

Special Programs

Available drying options: Anti-crease only available in Fluff,

Sturdy

Woolens

Delicate items which allow machine
drying.

Take items out immediately after the end
of the program while still slightly damp.
Allow items to air dry.

Smooth

Program for reducing creasing in
delicate items.

-

Sturdy

For mixed loads of durable items.

-

Fluff

Individual items to be freshened and
fluffed with cool air.

Reduce load size.

TIMED CYCLES

Available drying options: Gentle, Anti-crease

20 min

Individual items or very small loads,
e.g. beach towels, swimsuits.

-

30 min

Individual items or very small loads,
e.g. beach towels, swimsuits.

Quick Guide

Summary of Contents for T 1403 VENT ED DRYER - OPERATING









































Reviews: