manualshive.com logo in svg

Miele SmartLine, Operating And Installation Instructions, Page: 41 / 84

Share
Download
Miele SmartLine Operating And Installation Instructions Download Page 41

Programming

41

You can adapt the programming of the
SmartLine element to your personal
needs. Several settings can be altered
in succession.

After accessing the programming
mode, the 

 symbol and 



 will appear

in the timer display. After a few seconds

:

 (programme 01) will flash altern-

ately with 

:

 (code) in the timer dis-

play.

Changing the programming

Accessing programming mode

With the SmartLine element
switched off

, press and hold the 

and 

 sensor controls together until

the 

 symbol lights up and 



 is

shown in the timer display.

Setting the programme

For a two-digit programme number
you need to first set the tens position.

Touch the 

 sensor control re-

peatedly until the programme number
you want appears in the display, or
touch the appropriate number on the
numerical display.

Setting the code

Touch the 

 sensor control re-

peatedly until the code number you
want appears in the display, or touch
the appropriate number on the nu-
merical display.

Saving the settings

While the programme is showing in
the display (e.g. 

:

) touch the 

sensor control until the indicators go
out.

To avoid saving the settings

Touch the 

 sensor control until the

indicators go out.

Summary of Contents for SmartLine





















































































Reviews:

No comments