Miele SM Series, Operating Instructions Manual

Page: 53 / 208

en
53
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following sec-
tions: “Warning and safety”, “Caring
for the environment” and “Installation
and connection” (“General battery in-
formation”).
Removing the r
oller brush (Fig. 41)
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove stub-
born soiling and clean the inside of the
Electrobrush.

Unlock the cover on the side of the
Electrobrush so that the
 symbol
becomes visible.

Lift the cover up as far as it will go.

Remove the roller brush.

Remove the roller brush handle if you
identify heavy soiling there.

Clean the roller brush and the roller
brush handle, and remove any stub-
born soiling inside the Electrobrush.

Reassemble the Electrobrush in re-
verse order.
Replacing the rechargeable battery
An original Miele AP01 lithium-ion re-
chargeable batter
y (HX LA) is r
equired.