When to change the thread
lifters
The thread lifters on the suction inlet of
the floorhead and the upholstery nozzle
SPD 10 (depending on model) can be
replaced.
Check them from time to time to see if
the pile has worn down.
Replacing the thread lifters
^
Use a suitable screwdriver to remove
the thread lifters from the slots. There
are two grooves to help you.
^
Fit new thread lifters.
FiberTeQ und AirTeQ floorheads
^
Use a suitable screwdriver to remove
the thread lifters from the slots.
^
Fit new thread lifters.
Upholstery nozzle SPD 10
a
Disengage the thread lifter unit at
each side of the upholstery nozzle
using a coin.
b
Fit a new thread lifter unit and lock
into position.
Maintenance and care
27
Summary of Contents for S6 Poti
Page 4: ...Description of the appliance 4 ...
Page 34: ...34 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved S6 Poti 0912 M Nr 09 234 070 01 ...