Miele PWM 506 Mop Star 60 Operating And Installation Instructions Download Page 28

Page: 28 / 84

4. Selecting programme settings

Selecting extra options

You can select Extras for a wash pro-
gramme.

For some programmes, an Extra is
offered directly in the main menu.



Touch the sensor of the Extra to ac-
tivate it.

For some programmes, you select Ex-
tras in the

Extras

sub-menu.



Touch the

Extras



sensor.



Extras

Pre-wash

Rinse plus







Select one or two of the available Ex-
tras in succession.

Not all extras options can be selected
with every programme. If an Extra is
not listed, it is not permitted for use
with the wash programme in question.

Selecting further options

You can select a delay start period or
change the settings of the washing ma-
chine.



Touch the

Further choices



sensor

control.

The following will appear in the display:



Further

choices

Finish at

Supervisor level







Select the option you want.

The display will change to the sub-
menu for that option.

Delay start is not possible for some
programmes.

Summary of Contents for PWM 506 Mop Star 60





















































































Search results

Summary of Contents for PWM 506 Mop Star 60

Reviews:

Related manuals for PWM 506 Mop Star 60

Brands by name

Popular brands

Miele PWM 506 Mop Star 60, Operating And Installation Instructions

Search results

Summary of Contents for PWM 506 Mop Star 60

Reviews:

Related manuals for PWM 506 Mop Star 60

Brands by name

Popular brands