![background image](http://html.mh-extra.com/html/miele/pur-68-w/pur-68-w_operating-and-installation-instructions_235353020.webp)
Cleaning and care
20
Housing
General information
The surfaces and controls are sus-
ceptible to scratches and abrasion.
Please observe the following clean-
ing instructions.
All external surfaces and controls can
be cleaned using hot water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
Make sure that water does not get
into the cooker hood.
Only clean the area of the controls
with a damp cloth.
Then wipe the surfaces dry using a
soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents.
Important for appliances with stain-
less steel surfaces
(This information does not apply to the
controls).
Stainless steel surfaces can be
cleaned with a proprietary non-abras-
ive cleaning agent designed specific-
ally for use on stainless steel.
To help prevent re-soiling, a propriet-
ary conditioning agent for stainless
steel (available from Miele) can also
be used.
Apply sparingly with a soft cloth.
Important for RAL coloured housing
(Special order finish)
Please observe the general notes on
cleaning earlier in this section.
It is very difficult to clean this type of
surface without causing minor marks
to the surface material. This can be-
come particularly noticeable depend-
ing on the type of lighting in the kit-
chen.