Installationsplan / Installation plan: PT 8251/8253/8255/8257
Datum / Date: 12.01.2011
Seite / Page: 10
Fittings (supplied) Without plinth
2 × clamps
2 × screws DIN 571 (Ø × length)
mm
6 × 40
2 × rawl plugs (Ø × length)
mm
10 × 50
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
On concrete platform
2 × clamps
2 × screws DIN 571 (Ø × length)
mm
6 × 40
2 × rawl plugs (Ø × length)
mm
10 × 50
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
Machine data
Unit width
mm
906
Machine depth
mm
852
Unit height
mm
1400
Casing width
mm
900
Casing depth
mm
747
Minimum width of delivery access to installation site
mm
860
Recommended rear wall gap (measured to front of machine)
mm
1300
Min. wall gap (to rear edge of lid)
mm
500
Net weight
kg
150
Dynamic floor load, max.
N
1624
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
W
512
A Noise level
dB (A)
68.6
A Sound pressure level
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)1 m
dB (A)
55
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Measurements in mm.
