Miele PT 7136 Operating And Installation Manual Download Page 18

Page: 18 / 64

Jeans

Load size: 7.7 lbs (3.5 kg)

Normal, Hand iron

Items

Denim fabric items, pants, jackets, skirts or shirts, etc.

Shirts

Load size: 5.5 lbs (2.5 kg)

Normal, Hand iron

Items

Shirts and dress shirts.

Outerwear

Load size: 7.7 lbs (3.5 kg)

Normal, Hand iron

Items

Outdoor clothing suitable to dry in a tumble dyer.

Proofing

Load size: 5.5 lbs (2.5 kg)

Items

For dryer suitable items, e.g. ski and outdoor clothing, tablecloths
and poplin items.

Note

– This program has an additional step for water proofing.

–

Water proofed items must only be treated with a water
repellant that is "Suitable for membrane textiles".

These

chemicals are based on flourochemicals.

–

Do not dry items which were treated with agents containing
paraffin! This is a fire hazard.

Towelling

Load size: 14.3 lbs (6.5 kg)

Items

Terry laundry, e.g. towels, beach towels, bath robes.

Program guide

Summary of Contents for PT 7136

































































Search results

Summary of Contents for PT 7136

Reviews:

Related manuals for PT 7136

Brands by name

Popular brands

Miele PT 7136, Operating And Installation Manual

Search results

Summary of Contents for PT 7136

Reviews:

Related manuals for PT 7136

Brands by name

Popular brands